Being used for coarse and secondary crushing, jaw crusher machine is mainly used to crush mineral ores with compressive strength less than 320MPa. With remarkable features of easy storage and convenient transportation, sand aggregates can be widely used for industries like mining, building material, chemical engineering and metallurgy, etc.

The following content will discuss about the working principle of jaw crusher machine. After running at normal, jaw crushing plant should be fed evenly. Materials to be crushed should be fed into the cavity of jaw crushing plant at even speed. To avoid the overloading situation, you should not add material toward only one side.

Under the normal work of jaw crusher, temperature of bearing should not be higher than 30℃. For the highest temperature, it should not be higher than 70℃. If it is over than the 70℃, you should immediately shut down the jaw crusher and solve this failure. Known as the NO.1 brand of jaw crushing plant, FTM Crusher Company dedicates to offering the best products and services for you.

Before shutting down the dynamo, you should stop the feeding work first. You can shut off the electricity until all materials in crushing cavity are totally discharged. If failures occur due to the material blocking in crushing cavity, you should immediately shut off the electricity. New run of jaw crusher can begin until all materials in crushing cavity are cleared away. 

Greater discounts for you on website of FTM Crusher Company! 

Fote Heavy Machinery: www.orecrusherfactory.com

Fote Official Email: vip@sinoftm.com