To process the quartz sand, we can use the FTM jaw crusher machine. When we run the jaw crusher machine, we should notice several details. After running the jaw crusher, we should not feed materials hurriedly. When jaw crusher works normally, we can start the feeding work. The crushed quartz should be evenly delivered into crushing cavity.

If there are much quartz at the feeding mouth, the jaw crusher may be blocked. When jaw crusher works, the maximum temperature of bearing should not be higher than 70℃. If so, we should immediately turn off the electricity and find out reasons. Before stopping the work of jaw crusher machine, we should not feed material any more.

When all materials are discharged out, we can turn off the electricity. During the working process, if we find the crushing cavity is blocked, the first thing is to immediately turn off electricity. Then, before launching the jaw crusher again, we should clean the sand materials in crushing cavity.

If jaw crusher machine works for a certain period and its jaw plates are worn out, we can turn around to use. Besides, we should frequently check the jaw crusher and timely add the lubricating oil. If screws are loosened or key parts are worn out, we should deal them immediately.

If you have any problems, you can visit our website and consult our on-line staff. Meanwhile, you can call the 0371-67772626.

Fote Heavy Machinery: http://www.orecrusherfactory.com/orecrusherpro/20-stone-crusher.html

Email: vip@sinoftm.com

 Silicon carbide is a mineral that we often see! It has wide application ranges if being processed. Except for the stone crusher machines, we can also use powder making machines to process silicon carbide. The powder making machines are Raymond mill, High-strength Raymond mill and superfine mill.

Raymond mill is often used to grind silicon carbide. It performs quite well when grinding silicon carbide and it has the superior advantages. The Raymond mill can independently finish the grinding work. From the grinding work to packaging work, the Raymond mill does not need the help of other machines.

Compared with other brands of Raymond mill, FTM Raymond mill can effectively improve the output of silicon carbide and has higher working efficiency. With remarkable features of smooth and reliable operation, the Raymond mill can not harm operators. Besides, it is made of excellent steel materials, so it has strong wear-resistant ability and long service life.

There are many models of High-strength Grind Mill. It is a kind of high-efficient and energy-conserving grind mill. Similar with Raymond mill, high-strength grind mill is also suitable to grind silicon carbide. It has the following advantages. We can adjust the size of finished products within a certain scope. Besides, it is very convenient and rapid to adjust the size.

The high-strength grind mill can work continuously and has low failure rate. It is very convenient to operate and maintain high-strength grind mill. The finished products have fine size and even shape. Click website to see price list of stone crusher machines!

Fote Heavy Machinery: http://www.orecrusherfactory.com/orecrusherpro/5-jaw-crusher.html

Email: vip@sinoftm.com

 Raymond mill is a kind of common grinder for feldspar. It is indispensable and necessary. Being in cubic structure, raymond mill has little floor space. So, we can save the cost for construction. The Raymond mill can independently finish the grinding work of whole line. With remarkable features of high automatic degree, Raymond mill can produce much finer and even products.

The processing rate of Raymond mill is 99% and it is not accessible for other machines. High-strength Mill is a kind of product that we make on the basis of Raymond mill. This equipment has relatively advanced processing technology and adopts the spring system. The output of high-strength mill is much higher than that of Raymond mill.

We adopt the advanced and enclosed systems for making transmission part of high-strength mill, so it can work stably and reliably. The major parts of high-strength mill are made of excellent and wear-resistant steel materials. Besides, we adopt the centralized control system, so the high-strength mill can be automatically operated and maintained.

Except for grinding mills, we can also use stone crusher machines to process feldspar like jaw crusher, cone crusher, hammer crusher and impact crusher. I have discussed about them in last news. You can open our website to watch! All the above machines are very important for processing feldspar. Hope it can help you a lot.

If you want to purchase the above machines or want to know more about them, welcome to visit our website or consult with our on-line staff.

Fote Heavy Machinery: http://www.orecrusherfactory.com/orecrusherpro/23-impact-crusher.html

Email: vip@sinoftm.com

 Slate is a kind of shallow rock, mainly the degenerative silty sedimentary rock, tuffaceous rock and clay rock. The recrystallization is not remarkable. Under the microscope, we can see a part of argillaceous limestone and siliceous stone. For a long time, the slate is mainly used for moisture protection and thermal insulation.

Being safe and environmental-friendly, slate is used for building industry. For the slate jaw crusher, it performs quite good when dealing slate. The following content will discuss about this machine in detail. Since the crushing cavity of jaw crusher is very large and deep, feeding capacity and working efficiency are very high.

Featured in the strong crushing capacity, jaw crusher machine can produce much finer and even finished products. The discharging mouth of jaw crusher is adjusted by the gasket, so it is easy to be adjusted. Structure of jaw crusher is simple and it takes small land. Besides, it is easy to operate and maintain the jaw crusher machine.

During the working process of jaw crusher machine, there is no noise and pollution. By virtue of the superior technology, service and equipment, FTM Crusher Company rapidly takes the leadership of market and defeats many competitors. The kinds and models of jaw crusher are many. They are widely popular among customers.

More important, the price of jaw crusher is very cheap. You can save a lot. Click website to see the price list of jaw crusher machine!

Fote Heavy Machinery: http://www.orecrusherfactory.com/orecrusherpro/21-rock-crusher.html

Email: vip@sinoftm.com

 Hammer crusher, often used for secondary and tertiary crushing, enjoys the features of high working efficiency, strong working capacity and long service life. Except for the above, it also has some superior advantages. The hammer crushing machine can work continuously and failure rate is too low. To certain degree, you can save the total cost.

The hammer crusher can still perform well, even though the materials to be crushed have high hardness. In a word, the hammer crusher can adapt to different situations. For all key parts like hammer and rotor, they are made of the world-level excellent materials. With remarkable features of high quality, good performance and high working efficiency, hammer crusher has a long service life.

Meanwhile, we optimize the grate seem to make discharging work more smooth. The finished products have even size and fine shape. Since we equip the hammer crusher with the advanced dedusting device, there is no dust during the working process. The discharging system is very reasonable. You can adjust it according to your actual needs.

Featured in the high flexibility and wide application ranges, hammer crusher has little demands toward the raw materials. There is no dust and noise during the working process. Energy consumption is low and working efficiency is high. In a word, the hammer crusher is very economical and practical. To get more about hammer crusher, please visit our website and download the latest price list!

Fote Heavy Machinery: http://www.orecrusherfactory.com/orecrusherpro/21-rock-crusher.html

Email: vip@sinoftm.com