Strong pressure briquetting machine is mainly used for pressing coal powder, slurry, middling coal, coking coal, coke powder and metallurgical powder and refractory. Strong pressure briquette machine (http://www.ballpress-machine.com/p-3.html) is associated with the development of coal briquette widely used and people increasingly demanding on the environment, strong pressure briquette machine is mainly used for pulverized coal, coal slurry, coal, coke powder, coking coal, metallurgical powder cold-pressing pellets, refractory material. Every powder material, need to be on the stove will be strong pressure ball machine to complete.

1. Adopt a continuous speed operation mode. Such as the use of the variable voltage control, pole-changing motors, electromagnetic coupling governor, frequency control devices.

2. New strong pressure briquette machine should first consider the selection of the high-energy and save energy motor,then consider its other performance indicators in order to save energy.

3. Reasonable installation the parallel low voltage capacitor to carried out the reactive power compensation, thus effectively enhancing the the power factor, to reduce the reactive loss, and saves the electrical energy.

4. Improve strong pressure briquette machine“s motor efficiency. If the motor”s cooling fan is changed into cooling fan, in load is small and motor is outdoor in the winter, stop using the cooling fan, conducive to reducing energy consumption.

5. The stator winding of grafting into the star – triangle hybrid cascaded winding, according to load the severity of conversion star connection or delta connection will help to improve the windings of the magnetic force waveform and reduce the winding operating current, to achieve energy efficient.

6. The replacement of the big horse cart motor, the “big horse cart” In addition to the waste of energy, can easily cause damage to the equipment. In addition, reasonable adjustments strong pressure ball press machine (http://www.ballpress-machine.com/pro4.html) motor supporting the use of the motor can run at high efficiency work area to achieve energy saving.

7. From the joints leading to the power meter and the wires leading to the motor cross section should meet the carrying capacity, and the wire should be as short as possible to reduce the lead resistance, reducing losses. (The development of strong pressure briquette machine will help promote the the briquette enterprise”s process).

Welcome to contact or visit Fote Machinery: info@sinoftm.com.