Sawdust pellet machine or sawdust pellet mill can produce 0.8-1 tons of 6/8mm diameter pellets by using wood chips or sawdust from wood processing factory as raw materials. Sawdust pellet machine is applied to the shapeless material with low adhesiveness such as the rice husk, sunflower seed husk, peanut shell and other fruit shell branch, trunk, bark, crop straws, rubber, cement, ash and other chemical materials.

Sawdust pellet mill is widely used in biomass fuel plant, power plant, wood processing factory. The processed sawdust particles can replace coal, oil, natural gas and other fuels, which can be used for combustion, barbecue, fireplace, etc. Calorific value is 4000-4500 kcal, ash content is lower than 6%, the water content is less than 8%. It is the ideal pressing shaping equipment with low investment and high profit.

The order of shutdown operation is on the contrary of open operation. Shut down the equipments according the workflow from front to back. When the low material plsition of granulating warehouse shows no material, open the artificial feed door of pellet mill to Check the feed inlet conditions. When the material stream is significantly reduced, artificially discharge the cooler and increase feed flow back to pellet mill. In that way, the material stream to inlet of pellet mill increased to ensure the pellet quality. At the same time, pay attention to feeding tube back to machine is blocked or not. If the feeding tube is blocked, stop the cooler, artificial feed back to pellet mill. If not blocked, check the feeding conditions of inlet. After a few minutes of discharging the materials in feed tube, discharge the materials in cooler, which can persist the situation that a few materials in the feed tube and reduce the pollution next production.

If you want to buy high efficiency pellet mill, welcome to contact or visit Fote Machinery: info@sinoftm.com.