Ring die pellet mill (also known as: ring die pellet making machine, ring die pellet machine), belongs to the feed granulating equipment,is a kind of feed processing machinerythat can compress the corn, soybean meal, rice husk, straw, grass, etc into granulator. High quality ring die pellet machine is widely used in large, medium and small aquaculture farms, grain feed mills, animal farms, poultry farms, individual households and small and medium-sized farms, or large, medium and small feed mills.

Ring die pellet machine for sale (http://www.woodpelletmillchina.com/news.html) is the main feed pellet feed production machinery and equipment, its performance， to a great extent, determines the output of feed processing and occupies very important position in the process of feed processing. Certificated ring die pellet making machine adopts the mechanical obsessive feeding, materials enter the granulating chamber by high speed rotating centrifugal distribution, then distributed by scraper, feeding is not uniform;For flat die pellet machine,materials go vertically into the crushing chamber depending on own weight , feeding is even.

Ring die is of the high speed, the material damage rate is high when being discharged ;And flat die belongs to the low speed one, low breakage rate. Under the equivalent diameter of the mould, the diameter of the ring die wheel is limited by the diameter of ring die mould, so the pressure are limited in size the diameter of flat die wheel is not affected by the diameter of the mould , can extend the space of the bearing installed inside.The large bearing reinforces roller bear ability, not only improves the roller pressing force, but also extends the service life.

Ring die pellet mill has the following characteristic:

1. Double layer die.:Two layers both can be used independently so the machine reduces the cost; What’s more, two layers of the die also can be used at the same time, in this way, the efficiency has been improved greatly, high capacity and save energy.

2. Independent and frequency conversion discharge device can ensure the rate of pellet formation.

3. Die is static, rollers rotary; materials are evenly distributed around, because of centrifugal force.

4. Ring die and vertical structure are good for cooling the pelletizing room.

5. Vertical feeding, directly in place.

If you are interested in pellet mill for sale, welcome to contact or visit Fote Machinery: info@sinoftm.com.