|
Electrical Characteristics
|
|
STC Power Rating Pmp (W)
|
210
|
|
Open Circuit Voltage Voc (V)
|
33.2
|
|
Short Circuit Current Isc (A)
|
8.42
|
|
Voltage at Maximim Power Vmp (V)
|
26.4
|
|
Current at Maximim Power Imp (A)
|
7.95
|
|
Panel Efficiency
|
13.4%
|
|
Fill Factor
|
75.1%
|
|
Power Tolerance
|
-5.00% ~ 5.00%
|
|
Maximum System Voltage Vmax (V)
|
1000
|
|
Maximum Series Fuse Rating (A)
|
15
|
|
Temperature Coefficients
|
|
Temperature Coefficiency of Isc
|
0.070 %/ºC
|
|
Temperature Coefficiency of Voc
|
-0.34 %/ºC
|
|
Temperature Coefficiency of Pmp
|
-0.48 %/ºC
|
|
Mechanical Characteristics
|
|
Cell Type
|
Polycrystalline Cell
|
|
Cell Size(mm)
|
156 × 156
|
|
Cells
|
6 × 9
|
|
Dimensions
|
1538.0 × 1020.0 × 40.0mm (40.2 × 60.6 × 1.6 inch)
|
|
Weight
|
25.0Kg (55.1 lbs)
|
|
Junction Box (Safety Rating, Bypass Diodes)
|
ProConnect® IP65 Junction Box with patented connection system and 3 bypass diodes
|
|
Positive Cable (Length, Cable Cross-Section)
|
1000mm, 4 mm²
|
|
Negative Cable (Length, Cable Cross-Section)
|
1000mm, 4 mm²
|
|
Plug Connector (Type, Safety)
|
Multicontact MC4 connectors
|
|
Front Cover (Thickness,Material)
|
Front 2.8 mm highly transparent low-iron tempered safety glass. Rear 2.8 mm heat strengthened safety glas
|
|
Backsheet Cover (Color, Thickness, Material)
|
|
|
Encapsulation Materials
|
|
|
Frame Material
|
Frameless
|
|
Operation Conditions
|
|
Nominal Operating Cell Temperature (NOCT)
|
44.0ºC
|
|
Operating Temperature
|
-40.0ºC to 85.0ºC
|
|
Maximum Load
|
5400
|
|
Hail Storm Rating
|
|
|
Fire Safety Rating
|
|
|
Warranty & Certification
|
|
Certificates
|
- CE Europe
- IEC 61215 Ed.2
- IEC 61730 Ed.2
|
|
Defects & Workmanship Warranty Period
|
5.0 Years
|
|
90% Power Output Warranty Period
|
10.0 Years
|
|
80% Power Output Warranty Period
|
25.0 Years
|
|
Are Warranties Insured By Third Party
|
False
|
Multisol® Integra Vitro is the next generation of Scheuten’s Integra (in-roof) solution, suited for almost any sloped roof. This new generation Integra Vitro features the full glass-glass Multisol® Vitro laminate, resulting in superior strength (5400Pa) and an even better durability of the module. This aesthetically pleasing PV in-roof installation system replaces the conventional tile covering, either part of the roof or the entire roof.
Multisol® Vitro glass-glass laminate is selected from a narrow flash power range resulting in more accurate power, less mismatch losses and thus higher energy yields and increased revenues from your PV system. The modules are equipped with a Pro Connect® IP65 Junction box with its patented connection system.
Multisol® Integra Vitro is based on the Solrif system by Ernst Schweizer AG consisting of efficient aluminum construction designed for simple and fast installation. Since the market launch in 1999, the system has been used extensively in a variety of installations (dozens of MWp). The success is based on high quality Swiss craftsmanship together with numerous years of experience and flexibility to fit almost every roof situation.